|
 Total
Suspended Solids Analyzer Features:
- Supports 1 Total Suspended
Solids Sensor
- NEMA 4x enclosure with 4 predrilled
and plugged conduit holes.
- Part Selection and design
conforms to applicable UL/CSA/CE safety standards.
- 115/230 VAC selector switch;
50/60 Hz: Heater terminals; standard glass fuse
- Supports calibration of both
zero point (in clean water) and span using grab sample method.
Total Suspended
Solids Analyzer LCD Display:
 2
Alphanumeric Lines of at least 16 characters each.- Readable from 0 to 70 degrees
C (display temperature)
- Contrast adjustable through
keypad
- LED Backlighting
- Tactile feel keypad
- For Model 15 Sensor, displays
TSS over the range of 0 to 30,000 mg/l. Displayed
resolution will be 3 active digits, but no decimal places.
Total Suspended
Solids Analyzer Relays:
- 4 relays total (2 SPDT form
C and 2 Normally Open)
- All Contacts 250VAC 6 Amps
resistive load.
- Both form C, and 1 Normally
open relay to be programmable TSS set points with user
- selectable hysteresis.
- 1 of the normally open relays
programmable for jet wash operation.
Total Suspended
Solids Analyzer Specifications:
- Analog output: 4-20mA
- Inherently isolated active
outputs 600 Ohms
- 1 channel indicates TSS over
programmable range
- 1 channel unused.
- 4 and 20 mA electrical values
adjustable through key pad over 2 mA range
|
