Analysis

Here are the available subcategories:

Wireless Multi-Parameter - Up to Sixteen (16) Channels.
Sensor Input; DO, TSS (MLSS), pH, ORP, Temperature

The Aysix Process Transmitter (PT2) multi-channel analyzer is a unique system that combines advanced electronics with the latest in wireless sensor technology. The analyzer will wirelessly communicate with up to 16 sensors and accepts any combination of DO, SS, pH, or ORP sensors, all with temperature output for each sensor. The system allows for flexible and economical process monitoring and control. The system needs power, and the signal is sent wirelessly saving installation costs, cutting down on install time, and allows for flexible sensor placement.

Chlorine Analyzer
Amperometric Chlorine Analyzer -FX-1000P

The Foxcroft FX-1000P Chlorine Residual Analyzer utilizes the most accurate online test method to determine Free chlorine or Total chlorine residual levels in a wide range of process waters, similar to that used in lab environment titrator test methods. Residual readings are instantaneous and do not rely on the sample and hold method; making it an excellent choice for your chlorine control or monitoring applications.

Multi-Parameter, Up to Eight (8) Channels
Sensor Input; DO, TSS (MLSS), pH, ORP, Temperature.

The Model MPA48 multi-channel analyzer is a unique system that combines advanced electronics with solid-state optical sensors. The analyzer will accept any combination of up to 8 sensors, (DO, SS, pH, and ORP) and automatically configure for the correct operation. The system allows for flexible and economical process monitoring and control. The DO sensor does not need membranes, fill solutions, nor routine calibrations and maintenance.

Chlorine Analyzer
Bufferless Amperometric Chlorine Analyzer

The Foxcroft FX-1000P-B Bufferless Chlorine Residual Analyzer is environmentally friendly, requiring absolutely no chemicals or reagents.

Multi-Parameter, Two (2) Channel
Sensor Input; DO, TSS (MLSS), pH, ORP, Temperature

The Model 2000 Mixed Liquor Analyzer is a two channel analyzer designed for the continuous measurement of dissolved oxygen and/or suspended solids in mixed liquor aeration basin. The microprocessor-based electronics of the Model 2000 analyzer provide a high degree of flexibility and ease of use. The instrument is designed to operate with any combination of DO, or TSS sensors in a variety of applications. The DO sensor to be used with this analyzer is an optical type sensor that measures the fluorescence and quenching reactions of a ruthenium complex that is immobilized in a sol-gel matrix. The SS sensor operates on the principle of single gap infrared light absorption as a means of detecting the presence of suspended solids.

Dissolved Oxygen
Single Channel (1)

The Model 1000 dissolved oxygen analyzer is a unique system that combines advanced electronics with a solid-state optical sensor. No other dissolved oxygen system can compare with the features and benefits of this revolutionary design. The Model 10 sensor utilizes an optical technique that does not consume oxygen like all standard membrane sensors.

Density (Consistency) Meter

The LQ500 density (consistency) meter uses microwave phase shift technology to determine concentrations of solids in the material to be measured flowing through pipes.

Applicator serves as an antenna to send and receive microwave signals, one set provided

ZERO POINT DENSITY IS DRINKING WATER AND IS SET AT THE FACTORY(The density of drinking water is the same world wide)

Portable Dissolved Oxygen
Hand Held with Logger

Model 3100 portable dissolved oxygen analyzer is a state of the art, easy to use meter that provides many benefits to the plant operations staff fluorescence sensor technology ,no membranes, fill solutions, or cartridges,sensor does not have to remain moist data logging with direct downloading to your PC calibration is factory programmed.

Total Suspended Solids
Single Channel (1)

Model 1500 suspended solids analyzer is a unique system that combines advanced electronics with a solid-state optical sensor. No other suspended solids system can compare with the features and benefits this revolutionary design. The Model 15 sensor utilizes optical principals based on the near infrare(880nm) range

Dust Detection
Continuous Monitor

The Dust Detect 1000 is a single device dust detector that has been specifically designed to continuously monitor the flow of particulate emissions from small stacks and emission points being passed through an air filtration system. It easily installs in the exhaust ductwork and can be used with several types of filtration systems. The probe on the Dust Detect 1000 is able to recognize abnormal particulate levels outside user-defined preset parameters and initiates an alarm when changes in emission exceed these levels.

Portable Suspended Solids Analyzer
Hand Held TSS Analyzer

Model 3150 portable suspended solids analyzer is a state of the art, easy to use meter that provides many benefits to the plant operations staff. Real-time SS for better process control eliminates the need for daily lab analysis data logging with direct downloading to your PC designed specifically for MLSS and RAS This system is supplied with Model 35 standard range sensor as show.

Dust Detection
Remote Display

BM-30 LGX The BM-30 LGX is a particulate monitoring device designed for general process and environmental monitoring. This particulate monitoring system consists of a control unit, a particulate sensor and a sensor coaxial cable. Applications for the BM3-LGX include continuous emissions monitoring, baghouse filter leak detection and process particulate flow monitoring. It detects many types of particulate including solid particulates such as dusts, powders, granulars and pellets as well as liquid particulates such as mists.

FIRST PREV ( Page 1 of 2 ) NEXT LAST