The partially filled electromagnetic flowmeter uses Faraday’s Law of electromagnetic induction in the same way as conventional electromagnetic flowmeters to measure the flow rate.
- Dissolved Oxygen
- Total Suspended Solids
- Interface Level Analyzer
- Sludge Retention Time Controller
- Wastewater Samplers
- Septage Receiving System
- Wireless Multi-Parameter Analyzer for DO, SS, pH, or ORP sensor input
- Nutrient Measurement
- Density
- Chloramination
- UV Transmittance
- Chlorination / Dechlorination
HOME > Flow > Electromagnetic Meters >
Mount Anywhere Flanged
No Straight Run Required
Electromagnetic Meters
Mount Anywhere Flanged No Straight Run Required
”No Problem for the Mount-Anywhere™ Magnetic Flowmeter”
Do you have junctions, tees, valves, probes, flanges, elbows, lack of space for straight piping runs or vertical down flow piping?
The Toshiba Flow Meter features a Mount Anywhere magnetic field distribution technology making it highly immune to upstream flow disturbances. While most manufacturers try to solve the problem with signal conditioning and massaging the data with algorithms, Toshiba has solved the problem by redesigning the flow tube itself, not the electronics. They have developed a new technology that they call “functional magnetic field distribution”. If you were to put a gaussmeter in the flow tube of conventional mag flow tube you would see flux densities fluctuate in the figure 8 pattern mentioned earlier.
Sanitary
Electrodless, FDA Approved
LF511 Gap-FreeĀ Sanitary Capacitance Electrodeless Ceramic
The LF511 flowmeter has exclusive 0.01 µS/cm ultra low conductivity specification on flows up to 9.84 ft/s for normal or ultra low conductivity service.
Capacitance type electromagnetic flow meter sanitary type LF511/LF541(LF516/LF546) is designed for applications handling food and beverages.
Sanitary, Mount Anywhere
No Straight Run Required
Sanitary electromagnetic flowmeters LF490 series are designed for applications handling food and beverages. Sanitary flowmeters must be structured in such a way that operation and handling is simple, easy and thorough for the purpose of sanitary control such as cleaning (CIP/SIP), sterilization and drying.
Wafer Mount
Electrodless
The capacitance type Electromagnetic flowmeter, model LF510/LF540,employs the surface electrode system outside the alumina ceramic tube, therefore, the electrodes do not come in contact with the process fluid.
Flanged
Standard Service
The Global Series Premium Value Magnetic Flowmeter is one of the greatest values in the magmeter market. It is economically priced yet loaded with features not found in many top-of-the-line conventional magmeters. The meter is built with Toshiba’s reputation for high quality, and the detector has a 40-year MTBF rating using military specification (MIL-HDK-217F) standards.
Electromagnetic flowmeters are instrumentsfor measuring the flow of conductive fluids, using Faraday's principle of electromagnetic induction. Toshiba has been marketing electromagnetic flowmeters since the late 1960's. Toshiba flowmeters, the result of a wealth of experience and considerable engineering expertise, have won accolades in all areas of industry. A full lineup of products covering diameters from 2.5 mm to 3000 mm as well as various liner materials to accommodate diverse fluids are available, making possible fluid measurements in almost any imaginable application.
Partially Filled, Flanged
Measures Variable Flow and Volume
Small Bore
For Low Flow Rates
The LF470 is a micro fractional detector designed to measure a small amount of fluid containing substance such as chemicals. The wetted materials for the LF470 are corrosion-resistant ceramic and platinum electrodes and are compatible with a wide range of fluids. The LF470 is a lightweight palm-sized detector and can be mounted with a LF602 converter. The lineup of LF470 are 2.5mm (1/10 inch), 4mm (1/6 inch), and 6mm (1/4 inch).
SITEMAP
SEARCH