Pro
I 
The Pro I Capacitance
Sensors features a brightly illuminated LED status indicator.
The top mounted LED allows you to visually determine the status
of the sensor without removing the cover. The status conditions
are as follows: Blinking LED- sensing Probe is uncovered;
solid LED- normal operation and the sensing probe is covered;
off LED- failure has occured and fail-safe relay has responded.
The Pro I provides reliable point level detection and process
control for solid, liquid, and slurry materials. |
|
Pro X
The Pro X Capacitance Sensors
are specially designed for applications in hazardous locations.
It's Pro Shield technology ignores material buildup, guarding
against false indications. The sensor housing is explosion
proof - for Class II approval applications, select the Pro
IIX model. |
|
Pro
II X
The Pro II X is our most
versatile all-purpose probe. It works reliably in bulk solids,
powders, slurries, or liquids. It has a rugged 5/8"
dia. 316 ss probe featuring "pro-shield" protecting
against false readings because of coating and buildup on
probe.
|
|
Pro Flushmount
The Pro I-FL Flushmount Capacitance
Probes feature a noninvasive design that mounts on the exterior
of the vessel. Applicable for a wide range of solid, liquid,
and slurry materials where intrusiveness is a concern. |
|
Pro IIX 3A
The Pro II X 3A conforms to
the 3A and USDA sanitary standards for sensors and sensor
fittings used for milk and milk products' equipment. It also
conforms to food grade and pharmaceutical standards. However,
its durable, abrasion resistant probe assembly makes it suitable
for use in a variety of solids, liquids, and slurries. |
|
Pro IIIX
The Pro IIIX Capacitance Sensors
offer reliability and affordability. Its probe assembly is
constructed of 5/8" stainless steel covered with a Delrin
sleeve, offering increased durability for use in abrasive
environments. This non-shielded probe is ideal for use in
both liquid and solid applications. |
|
Pro Remote
The Pro Remote Capacitance Sensors
are specially designed for high temperature, vibration, or
hazardous applications. This model features remote electronics
located in a separate housing. Depending upon necessary sensitivity,
this allows the sensor's electronics to be safely mounted
up to 75' from the sensing probe and hostile environment. |
|
Pro DC
The Pro DC Capacitance Sensors
offer reliable point level detection in a low voltage application.
Its Pro Shield technology guards against false readings from
material buildup. This allows the sensor to be used in vessels
storing a wide variety of dusty, sticky, or clinging materials. |
|
CompactPro
The CompactPro are compact
Capacitance Probes for reliable level measurement and plugged
chute detection in liquid, powder, granular, and pelletized
materials. This probe is designed for tight quarters where
proximity switches don't work. In addition, its special Pro
Shield technology ignores the material buildup that causes
proximity switches to fail. |
|
